Hello,


you can easily control the relais output of a Mobotix camera using the following actions parameters:

/control/rcontrol?action=sigouthigh&time=n&outmask=0xm

Where n is the time in seconds to activate the relais or output and m is 1 or 2 to select the output needed. This way if the connection is lost between your iPhone and the camera the output will not stay on forever.

Switching an output off can be done as follows:

/control/rcontrol?action=sigoutlow&outmask=0xm

Tested on Mobotix M12 with firmware 3.5.2.23.

Cheers,

pbw

edit: corrected outputmask into outmask