PTZ:
 | | |
| Code: Gauche: /cgi-bin/operator/ptzset?move=left Droite: /cgi-bin/operator/ptzset?move=right Haut: /cgi-bin/operator/ptzset?move=up Bas: /cgi-bin/operator/ptzset?move=down | |
| | |
Remarque:
LNZ4001 OK
Si la caméra est configuré en mode Image fixe, il faut rajouter l'adresse de la caméra avant chaque paramètre:
If the camera is a still image camera, then you need to add the camera address before each parameter:
[ipcamera]/cgi-bin/operator/ptzset?move=left